Zero waste compostable garbage bags

It has always bothered me when I throw garbage bags into my trash bin because I know that plastic will last for decades in the landfill or elsewhere.  So I was delightfully surprised to learn about hold on bags that are made from plant-based materials that are non-toxic and biodegradable without leaving any toxic residue.

Apparently they called the company HoldOn because there was a moment when they came up with the idea and went "hold on", there's a better way to do this.

I am using all three sizes:

4 Gallon Trash Bags: Our 17” x 18” small kitchen bags

 

13 Gallon Compostable Trash Bags

 

Compostable zip-seal Snack Bags 

(as an Amazon associate, I earn a small commission from sales of these products)

I am really pleased with these bags, they are strong and sturdy and hold up to normal use very well.  I really wish more products were made to be fully compostable like this, we would leave the world a better place for future generations.

My solar powered lifestyle

I am a DIY guy so I tend to do everything myself.  Pictured above left is my grid tied solar array consisting of 40 solar panels that I have installed with the help of friends over the years.  There is a very detailed blog on my website covering the design and installation of this system.  In peak sun it produces over 6 kW and surplus power goes back into the grid where I get a credit for every kilowatt hour exported thanks to net metering.  This allows me to be largely carbon neutral from April through November.  A few years ago I self-installed heat pumps in both my workshop building (pictured) and my home (here's a video about that).  I am located in Maine at the 44th parallel so in the winter, I have less solar and a higher demand for electricity to run the heat pumps, so for a few months I pay a substantial electric bill to run my heat pumps when the average temperature stays below freezing in the winter. (You can see detailed stats of my solar energy system power here).  The utility power is sourced from more than 60% renewable including hydropower, wind, and other renewables.  I believe Maine has the highest utility supplied renewable energy offering in the US.

Pictured in the photo above are also the following items:

2017 Chevy Volt.  This is my second Volt and it is an amazing car that is the fastest and sexiest vehicle I have ever owned.  With over 50,000 miles on it I still get a thrill driving it knowing that it is fully carbon neutral and I even put vanity plates on it that say: SUN PWRD.

 

Aventon Level.2 E bike.  This is my second E bike and it has an impressive 60 mile range with pedal assist and somewhat less than that if I were to use it in throttle only mode (riding it like a motorcycle without pedaling).  It is capable of level III, meaning that pedal assist can take me up to 28 mph easily.  (Level II goes up to 20 mph).  Despite all the electric assist, I get a lot of good exercise riding an average of 10 miles a day in good weather.  And as you can see in my previous post I have large panniers on the back that I use for picking up garbage and redeemable bottles and cans around my neighborhood.

Green Works self-propelled 80V cordless lawnmower.  This mower is an absolute beast and chews through tall grass with no problem at all.  I really like the self-propelled feature in the summer when it's unpleasantly hot and humid.  My lawn areas are relatively modest, just to keep a setback around the building and open areas around my garden beds, and fruit trees and this mower can cover the whole area on a single charge of the two 80 V 4AH batteries.

Black & Decker cordless 20V string trimmer.  This is a surprisingly powerful machine that chews through tall weeds with abandon.

Black & Decker 20V cordless hedge trimmer.  I refer to this as my "light saber" because it will cut anything up to half inch branches with ease.

Redeeming cans and bottles for fun/the environment/exercise/profit

My e-bike with panniers

I purchased my first E bike over a year ago and put over 1000 miles on it in the first year.  Prior to that I used to walk around my neighborhood with my friend to get exercise and we would also take a garbage bag and pick up trash and recyclables and redeemable bottles and cans.  After we both got E-bikes, I installed large panniers on my bike so I can carry more than two grocery bags full of trash.   

 

Partial screenshot from the Clynk app

In the last seven months, I have redeemed over 1700 containers.  It is shocking how many beer cans and bottles and miniature liquor bottles I pick up every week.  Apparently there are dozens of people who drink and drive and then throw these containers out of their vehicles onto the side of the road.😲 I cover a range that encompasses roughly a 3 mile radius from my rural home here in Maine which is all two-lane blacktops. 

The redemption system here in Maine pays $0.05 per container redeemed and $0.15 for vodka and wine bottles.  I signed up with a system known as Clynk that makes redeeming these containers easy.  You just put them in their special biodegradable bag with a barcode and drop them off.  They process them in the next few days and then give me a credit that I can pick up at the grocery store as cash.

This is a typical catch from a 10 mile bike ride

When I get home, I separate out the trash, recyclables, and redeemables.  There are many containers that I cannot redeem because they've been crushed on the road, I also clean up dirty cans and bottles before redeeming them, many of the beer cans are filled with dead slugs which is really gross.  There are also a lot of fast food containers and other general trash that I pick up.

Shown above is just the separated out redeemables.  There is a surprising number of miniature liquor bottles.  The state of Maine only recently enacted a law requiring $0.05 per miniature bottle, previously they were not counted as redeemable materials.  This does not seem to have diminished the use of these bottles much.

I enjoy getting the exercise and cleaning up my neighborhood - it's like a treasure hunt for me - looking for shiny objects along the road.  I call this my "get rich slow scheme" since I make around $100 per year, but it's not about the money for me.  I just use some of it to buy candy or lottery tickets.

I encourage those of you who might live in areas where you find a lot of trash along the roadside to walk with a garbage bag and pick it up.  Even if  your state doesn't have a redemption system, much of the trash I find can be recycled.  I feel strongly that it takes all of us working together as a community to improve the planet.

Whole house surge/lightning protection

 

As an engineer, I have a lot of electronic equipment in my home and separate workshop building.  While I could plug all of these items into separate surge strips, that would be unreasonably expensive and would not offer as much protection as installing a Delta surge protector in the main breaker box.  These devices are designed specifically to absorb the massive energy spikes that come from lightning and other transients.  

I installed this device in my breaker boxes many years ago and I'm really glad that I did!  I remember sitting on my front porch watching a massive thunderstorm come through and I saw a lightning strike hit the power pole 20 feet from workshop building with a massive FLASH-BANG that was terrifying. (That's not my home in the video above). 

The next day I noticed that my appliances were making a humming sound so I checked the voltage of the electrical outlets and found that I was getting 140 V AC and not the specified 120 V AC.  This implied that the pole transformer had been damaged by lightning so I called the utility company.  They showed up literally 20 minutes later with a replacement transformer and it took them about 1/2 an hour to replace it.  If I had not installed surge protection I would have lost thousands of dollars worth of electronic devices including all my consumer items like TV, DVD, stereo, computers and kitchen appliances like the microwave etc.  The only item that fell victim to that massive lightning strike was my cable modem because there was no protection on the cable line.  I have since added protection for the cable itself.

My house is on a rise in rural Maine surrounded by tall trees and lightning has hit and destroyed a couple of trees near the house.  My workshop building has 38 solar panels mounted to the roof.  For this reason I hired a company to install lightning rods on both my home and workshop building.  Back in 2010, they installed the systems at a total cost of around $3500 for both buildings. 

The roof mounted rods are connected to very heavy woven copper wires about 1/2" diameter that run down to two opposite corners of the building where they are connected to ground rods pounded deep into the ground.  If you are at all concerned about the risk of lightning hitting your home this is your first line of defense.  Lightning frequently destroys homes with fire and explosive damage.

 

Bedding in my garlic with wood shavings from my bowl turning classes

it's early November and the time of year when I plant garlic so it will come up in the spring.  I purchase heirloom garlic from the local farmers market and simply break off cloves and put them in the dirt about 2 to 4 inches down.  Then it is recommended to cover them over with mulch to protect them.  So I use shavings from the wood turning classes that I teach.  (More info about those classes here).  In the spring I purchase basil seedlings from the farmers market and plant those in the same vegetable beds.  The whole idea here is to make basil pesto from a combination of my own plants and garlic.  I typically can nine or more 8 ounce jars of pesto and store them in the fridge to tide me over through the winter.  And of course I enjoy garlic and many of the foods and stir fries that I prepare.

I also use my wood shavings for litter and kindling to light my wood stoves - one in my home and one in my workshop.  This particular batch of shavings includes some Osage Orange shavings that a student sent me from a tree on his property in Texas.  Here's a photo of the prepared bowl blank and a finished bowl:

 This blend of shavings looks quite nice on my vegetable bed:

I rake the shavings off once I see shoots poking up in the late spring and will either dump them out in the woods, or mulch them in two other garden beds.

This is all about living sustainably for me and also being self-reliant and saving money.

100% Recycled paper

 

When I buy printer paper from Staples (or any other office supply source), I always spend a little extra to purchase 100% recycled copy paper from a forestry certified source.  Staples also sell 30% recycled content office paper that is slightly less expensive.  It's a simple way to vote with my dollars for a more sustainable planet.  if more of us did this, we would support an industry that creates fully sustainable paper.

In my small town here in rural Maine we have a biweekly pickup of mixed stream recycling of plastics, metals, paper and cardboard.  I like to think that some of the paper I recycled has been turned into fully recycled content that I then purchase later. 

Chives from my garden

 

I have two chives plants in my garden beds, on the left is regular chives and on the right, garlic chives.  The chives plant is over 15 years old and the garlic chives I've had for over three years now.  These are the only perennials in my vegetable beds and I use fresh chives in scrambled eggs and stir fries throughout the growing season which runs from April through October.  Today was our first frost night so I have harvested a bunch of chives and dried them for use through the rest of the year.

I cut them up with scissors and lay them on parchment paper and then put them in the oven at 150°F for about half an hour or so.

Once dried I store them in an 8 ounce ball jar with a reusable plastic lid.  4 to 5 ounces usually lasts me through the winter and into the spring.  

I usually make scrambled eggs with fresh chives and shredded cheddar cheese.  Back when I was running an air B&B from my home my guests really enjoyed my special scrambled eggs.  They would watch as I walked out to the garden to cut fresh chives for the breakfast and enjoyed the local resource.  I would also use locally sourced free range chicken eggs that I bought at the farmers market.  Garlic chives when fresh have a real zing to them that have a definite garlicky flavor.

I enjoy making optimal use of all of the resources on my property as part of my commitment to living sustainably.

Solar water heating - 16 years of practical use

 

Solar water heating collectors

Back in 2006 I installed solar collectors on the side of my house that preheated water before it went into a propane water heater tank.  (see my detailed blog about this installation).  

demand heater on left
40 gal. storage on right

When that water heater tank failed in 2010 I replaced it with a propane demand unit that uses a lot less propane because it only fires up to heat water on an as-needed basis.  Standard water tanks - whether they are heated with gas or electricity waste a lot of energy by maintaining the heat in the tank that leaks out and has to be topped up all the time.

The company that made this complete kit that I purchased was called Butler Sun Solutions, and sadly they are no longer around because Barry Butler the founder has died.  Barry was an absolute genius and designed a very simple very affordable system that could be retrofitted into standard water heater tanks.  Since installing the system, I have done many upgrades and improvements.  But the original design as built had a break even cost (after incentives) of about five years.  I paid around $3000 for a complete kit and state and federal incentives reduced that to about $1500.  

One of the improvements I made was to put a "dashboard" on the window frame above my kitchen sink so I could monitor temperatures of the solar collectors and the storage tank.  As you can see from the photo above - the 40 gallon storage tank as reached 91.5°F.  The peak temperature of the collectors was over 150°F before this photo was taken in the afternoon.

I built a webpage that shows live real-time statistics of the performance of the system, click here to see that page.  As you can see, on a clear sunny day the water tank temperature can reach well over 100°F.  Sudden dips in the tank temperature are due to hot water usage such as dish washing and showers etc.

There are trade-offs to having a propane on-demand water heater.  Hot water does not arrive as quickly as it would from a storage style tank, however you can take really long showers because the water is heated as needed continuously.  The other trade-off is that when the solar storage tank temperature is above 100°F the demand heater gets confused and doesn't contribute heat, so there are sometimes periods where the shower gets cooler for a while before everything evens out.  These are small compromises that I'm comfortable making in order to leave the world a better place by reducing my use of fossil fuels.

What I've learned about the performance of this system is interesting.  I get the best performance around the spring and fall equinoxes.  Since I am at a latitude of approximately 43°, this means that the ideal tilt angle for the collectors to orient them optimally towards the sun would be at 43° (or rounded off to 45° for a typical roof slope).  But since my collectors are mounted vertically to a wall I'm sacrificing performance.  So in the summer when the sun is at its highest, the sun angle is least optimal and performance is compromised, conversely in the winter when the sun angle is much lower, the performance is improved, but with the trade-off of colder temperatures that limit how hot the water can get in the collectors.  Here in Maine, the average temperature remains below freezing for months in the winter and can dip well below 0°F

So clearly the maximum benefit of this system is in the spring and the fall where my demand water heater only has to make up the difference in temperature between what is in the storage tank and 120°F.  My well water temperature is about 50°F which is tempered somewhat by a pressure storage tank in the basement for a net of about 60 to 65°F.  So any increase above that threshold reduces my propane consumption.

I update the chart above every year to reflect the heating season's usage and costs.  As you can see I have reduced my gallons per year from around 800 gallons to as little as 111.5 gallons in 2020.  The red line represents dollars per gallon and clearly the cost of propane is extremely volatile and unpredictable.  However as you can see from the blue line my annual costs are going down despite increasing cost of propane.

So the net result is I am reducing my carbon footprint significantly while also saving money on my water heating costs.  Clearly, it's a win-win!

I realize that not everyone is inclined to do a DIY installation like mine, but the systems are not unreasonably expensive, especially in southern climates and the return on investment is typically less than 10 years.  Most competent solar installers can install something like this.  

As the news is constantly filled with epic climate crisis triggered events, it's time we all buckled down and did what we can to reduce our fossil fuel footprints.  Thousands of people are dying every year as a direct result of the climate crisis, and those of us with disposable income can afford to make adjustments for the betterment of mankind.

Home grown food

This year's applesauce

I live near the coast of Maine where the growing season is relatively short. Nonetheless I manage to harvest quite a bit of food from my property.  For me, living sustainably entails optimizing use of my land and natural resources.  And I like the idea of having my own homegrown and affordable food sources.

It is mid September as I write this and I have recently canned several jars of applesauce. The apples on my tree are small and very sweet and I often pick one just to eat during the day, and I give away or sell my applesauce to friends and neighbors.

Replacing a 4ft. fluorescent with an LED equivalent

 

New LED light - and old fluorescent

I teach wood turning classes in my workshop (https://www.arttec.net/Bowl_making_class/index.htm) and it is important to have plenty of good quality light.  So for years I have had a 4 foot fluorescent fixture right above the lathe, but recently I have been concerned that flying bits of wood that spin off the lathe could go up and hit and break one of the fluorescent tubes which would be really bad.  

As you may know, fluorescent tubes contain mercury, and I recently took a bunch of bad tubes into my town transfer station for safe disposal.  So I decided to upgrade that fixture to an LED equivalent and I'm very pleased with the result.  And of course LEDs do not contain Mercury and are not made of glass so I'm sure they can take a hit without concern.

This new fixture cost about $60 at my local ACE Hardware store which is not cheap, but you can find more affordable ones on Amazon. (As an Amazon Associate I earn from qualifying purchases.)  I hoped it would use less power, but it is a great deal more efficient.  Using my power meter, I learned that the fluorescent was using about 46.3 W while the new LED uses about 42 W  LEDs are generally rated for about 50,000 hours which is many more hours than you get from a fluorescent tube.  .

The brightness and color rendition index (CRI) are much better with the LEDs. I used my light meter to compare them and as you can see, the LED is more than four times brighter!

I'm really pleased with this change because I no longer have to worry about safety or disposing used fluorescent tubes.  Eventually, I will replace several other similar 4ft fluorescent units with LEDs.

It is also convenient that these fixtures can be daisy chained, there's a two-pronged socket on the end that allows you to plug another lamp into it.  This can really simplify shop light wiring.  Another plus!