Translate

Tuesday, August 23, 2022

Replacing a 4ft. fluorescent with an LED equivalent

 

New LED light - and old fluorescent

I teach wood turning classes in my workshop (https://www.arttec.net/Bowl_making_class/index.htm) and it is important to have plenty of good quality light.  So for years I have had a 4 foot fluorescent fixture right above the lathe, but recently I have been concerned that flying bits of wood that spin off the lathe could go up and hit and break one of the fluorescent tubes which would be really bad.  

As you may know, fluorescent tubes contain mercury, and I recently took a bunch of bad tubes into my town transfer station for safe disposal.  So I decided to upgrade that fixture to an LED equivalent and I'm very pleased with the result.  And of course LEDs do not contain Mercury and are not made of glass so I'm sure they can take a hit without concern.

This new fixture cost about $60 at my local ACE Hardware store which is not cheap, but you can find more affordable ones on Amazon. (As an Amazon Associate I earn from qualifying purchases.)  I hoped it would use less power, but it is a great deal more efficient.  Using my power meter, I learned that the fluorescent was using about 46.3 W while the new LED uses about 42 W  LEDs are generally rated for about 50,000 hours which is many more hours than you get from a fluorescent tube.  .

The brightness and color rendition index (CRI) are much better with the LEDs. I used my light meter to compare them and as you can see, the LED is more than four times brighter!

I'm really pleased with this change because I no longer have to worry about safety or disposing used fluorescent tubes.  Eventually, I will replace several other similar 4ft fluorescent units with LEDs.


It is also convenient that these fixtures can be daisy chained, there's a two-pronged socket on the end that allows you to plug another lamp into it.  This can really simplify shop light wiring.  Another plus!





Friday, July 29, 2022

Induction cook top, pans, and a repurposed rug

In my ongoing effort to reduce my carbon footprint, I have replaced my propane heating systems with heat pumps in both my house (see this post) and workshop (see this post).  Then I added six more 375 W solar panels to my solar array (see this video).  

It's near the end of July 2022, and I've started picking my blueberries and making blueberry jam which involves using my propane stove daily for about half an hour to boil the jam down.  I make batches of five jars and use one pot to boil the jam and another one to boil the jars to sterilize them.  

Running the propane stove this much has always bothered me both due to the fumes, and the carbon footprint.  So I did a little research and found that you can purchase an induction cooktop for under $50.  (As an Amazon Associate I earn from qualifying purchases.)  This surprised me because I thought they were much more expensive.  So far I am quite pleased with this unit that can pull up to 1800 W and can be set as high as 450°F.

click image to order this from Amazon




I didn't have the right cookware - most of my pots and pans are either stainless steel or aluminum which will not work with an induction cooktop unless the stainless steel pans have a steel base.  The only thing I had that would work with an induction cooktop is my wok shown above on the right.  So I went over to Goodwill and took a fridge magnet with me to test the bottoms of the pots and pans.  Induction cooktops will only work with ferrous metal cookware - that includes cast iron and steel pans and also stainless steel pans with a steel base.  It's simple enough to test for ferrous metal by just using a magnet, if it sticks it will work with an induction cooktop.  I quickly found a nice frying pan for five dollars and a Farberware sauce pan with lid for $10 (shown above), both are in excellent condition.  These three pieces of cookware should fulfill most of my needs.

While I was in Goodwill I noticed a rack of 5 x 7' rugs with a recycle logo on their labels so I looked closer and learned that they were made from repurposed carpets.  I had read about companies that are doing this, and I'm happy to support that industry.  I find it amusing that the label says: "Made from 100% undetermined fiber".  I'm trying it out in my front hallway, but may move it to cover the tiled floor in my basement.  I tend to track in a lot of dirt and grass clippings as I come and go, and a rug like this will help me wipe my shoes off and keep me from tracking dirt in to the house.


Wednesday, July 13, 2022

My E-bike and repurposing a replacement wheel

 


A year or so ago I purchased a new E-bike made by Ancheer for around $700.  It is one of the most affordable and highly rated E-bikes on the market and mine came with a 250 W motor in the rear hub.  (Click here to buy one - as an Amazon Associate I earn from qualifying purchases.)  After about 500 miles of pushing it really hard the motor failed on a steep hill.  I reached out to the manufacturer and they immediately offered to replace the motor.  Then came back a little later and said they didn't have motors available so they would send me an entire new wheel and tire.  Needless to say I was very impressed!

I certainly did not want to just put the old wheel in the trash so I took it to my local bike shop, and they said they could reuse almost all the parts except the burned-out motor and were happy to have it.

The replacement wheel came packed in a very sturdy cardboard box filled with chunks of white foam and also a dozen or so big bubble pack envelopes that they must have had around.  I took the bubble pack envelopes to my friend Tracy at Saltbox Pottery so she could use them for shipping her plates and she was grateful to have them.  Of course, the cardboard box was easy to cut up and put in the recycling bin.  I will also repurpose the white packing foam for shipping products.  I can cut that stuff to size with my bandsaw as needed.

This is all about living on a planet with finite resources and reusing and repurposing things as much as practical.

The reason I added large panniers to the bike is so that I can pick up trash and redeemable/recyclable cans and bottles that I find along the side of the road here in rural Maine.  Some days I fill both panniers!


Monday, July 4, 2022

Video documentation of my recent septic system replacement

When my septic system failed suddenly at the end of April 2022, I had to scramble to replace it.  It turns out that the original system was over 50 years old and pre-dated state laws requiring that designs be filed with state and town offices.  So there was no record of the design or layout.  I had to pump out the tank immediately $350), and my renter and I went into extreme water conservation mode.  We were able to reduce water consumption (from my well) by 50%, and it took us 4+ weeks to fill the 1000 gallon tank which needed to be pumped out again before work started.  The 2nd pump-out was less expensive ($250) because there were almost no solids to process.  And it was pumped out again right before the crew replaced the tank.

 I re-financed my house to cover the $21,600 cost and hired a soils expert ($550) to assess the site and engineer a new system.  That plan was then approved by the town codes enforcement officer and I put the job out to bid.  My small town of about 3300 people has 3 family owned earthworks businesses, and one company could start in early June.  The work took over a week with a few days off when it rained.  

They did an impeccable job and put everything back the way they found it or better.  I mean the lawn was totally torn up by 10 ton trucks driving over it and they put in new loam and seeded it with grass which is growing in nicely.  I asked them to remove a garden bed that they were driving over anyway and made that into lawn.  That bed had gone to weeds because I really don't care about flowers, just food that I can grow and eat or sell (see below).  The only flowers I keep are inside, I have several orchids and a giant 24 year old Philodendron that all do well with my green thumb.

I documented the whole process in both time-lapse - with a dedicated camera mounted to a tree so it could see the whole area, and my video camera for live action footage.  The result is 2 videos that I published on YouTube.  The shorter time-lapse one runs about 8 minutes:

And the longer live action one runs about 18 minutes:

It was all quite an adventure, and I was obsessed with watching the crew working.  I enjoyed talking with them in their breaks.  They did an impeccable job.  Now I can relax and not worry about my septic system since the new design should last over 40 years with proper care.  This means pumping out the tank every 3-4 years at a nominal cost of around $350.

Rural living is a bit like living in a space station because you are responsible for your water and sewage processing, and with my solar power system I'm generating almost all the power I use.  I also grow a lot of food, and compost my organic waste.  The compost feeds my vegetable beds and blueberry bushes. I canned 30+ jars of blueberry jam and 13 jars of basil pesto last year, and ate lots of other fruit and veggies.  Living off the land!


Sunday, June 26, 2022

My new 27 inch Greenworks cordless lawnmower

 

A year ago I purchased a small 20" Greenworks cordless lawnmower to replace the old 22" gas lawnmower that I had converted to electric many years ago, here's a link to my blog post about those mowers.

Last year my friend Roberta purchased a small property in the nearby town of Bath that has a very modest lawn and I encouraged her to get a cordless lawnmower.  This spring she went over the top and bought a giant 27 inch Greenworks machine.  This beast runs on two huge, heavy 80 V batteries and is also self-propelled.  I went over to help her un-box it and try it out and she quickly realized it was much bigger and heavier than she expected and massive overkill for her small lawn that is not much more than 1000 ft.².

So I proposed a trade, I would give her my 20 inch mower plus some cash and she would give me her new mower.  We are both very pleased with this exchange since the mowers we now have are perfect for our properties.  My lawn area is over half an acre and this big new mower is a joy to use especially in the heat of the summer when the self-propelled feature is a real blessing.  I also have a cordless weed wacker, hedge trimmer and chainsaws that I use a lot.

In the 20 years or so that I have lived on this quiet dead-end road in Maine I have encouraged many of my neighbors to embrace more sustainable lifestyles which includes buying an electric car, subscribing to solar power, and hopefully soon they will be replacing their stinky old gas lawnmowers with electric ones.  Some of them already have other cordless electric yard tools.

Scientists are warning that we are crossing the tipping point with the climate crisis and there may be no turning back.  This is why I do what I do!  I carry a constant awareness of future generations and the massive impact the climate crisis will have on their lives.


Failed septic system and energy monitoring update

In late April my septic system failed.  This constituted a household emergency and I had to scramble to get a new system designed and installed.  For those of you in the city unfamiliar with septic systems the sewage comes out of the house and goes into a large underground concrete storage tank that is typically 1000 gallons for a two bedroom house like mine.  Solids settle out in the tank and the liquids come out the other side and go to a leach field.  I have been doing proactive maintenance and having the tank pumped out every three years, but apparently the system was just so old that it eventually failed.  Where the pipe enters the leach field there is a distribution box that spreads out left right and center to feed perforated pipes buried under the ground.  When I exposed my distribution box I found that it was completely plugged up with gunk:

Distribution box opened up

In fact the entire pipe from the septic tank to the field was also plugged up.  From what I can tell this system was installed in the 1970s before the state required that records be maintained in the state house and local towns.  So I immediately hired a soils expert to design a new leach field ($550) which required him to come out and survey the land and test the soils figure out how big and what type of septic leach field to engineer for my location.  I took his design to my town office to get a permit approved for the construction of a new system and then put the design out to bid to local companies.

It turns out that my small town of Woolwich, population around 3300 has three family-owned  earthworks companies.  I ended up hiring Creamer and Sons Landworks.  Joe and his two sons started work in early June and it took them about seven working days to complete the installation, here are some photos:

Creating a berm around the Leach area
Crushed rock laid in.  The leach field pipes sit on top of this gravel.

They began by hauling off all the surface vegetation and dirt which they could later screen and process and bring back. Then they built up a berm out of sand and then loam and then installed the leach field inside the berm by laying down sand, then crushed rock then perforated pipe, then more sand, and then finally a layer of loam.  The town code officer approved the first step of the construction and later came back to approve the crushed rock installation as seen above. 

There were 5 ton and 10 ton trucks coming and going right through the middle of my lawn and at the end they put everything back with new dirt and grass seed and my new lawn is growing back in.  This whole project cost me over $21,000 and I had to refinance the house to pay for it.  They did an excellent job and I'm sure the system will last longer than I will!  Click here to see a blog post that links to two videos I made about the entire process.

Between the initial failure when I first had my septic tank pumped out to give me some time I had to pump it out a second time.  When they pump out just liquids they charge less - $250 compared to $350.  My housemate and I were able to dramatically reduce our usage of water by approximately 50% in order to defer further costly pump outs before the new system could be installed.

From an energy monitoring standpoint, I was able to clearly determine that we had in fact reduced our water consumption significantly by looking at the energy consumption of my 1500 W well pump which is down about 100 feet below ground in the granite.  Here's a screen from my Emporia energy monitoring app (see my previous post about this here) showing daily well energy consumption before and after extreme conservation measures:

Well pump energy

It looks like we reduced water consumption by approximately 50% and us guys were able to pee outside a lot since my property is rural and private.  Like many rural male Mainers I pee outside quite often anyway since it's an 80 foot walk to the house from my workshop that does not have plumbing.

After the septic system was installed I needed to run a sprinkler for an hour or so every evening to water in the grass and clover seeds I planted.  The contractors put grass seed and straw in the area where they replaced the existing lawn, and I elected to seed the whole septic area with white clover which is lower maintenance and good bee habitat. Clover is also a good nitrogen fixer that out competes weeds and grass.  

leach field planted with clover

sprinkler, and lawn  growing  back in

 The daily energy chart below shows a dramatic increase in my well pump usage to keep all that new loam nice and wet.

Well pump after septic installed

If I did not have a solar power system (38 panels producing a peak of over 8 kW) I would see a significant increase in my electric bill to run that pump so much.  Starting in mid-May, my solar energy production exceeds my needs and the utility allows me to bank my kilowatt hours as credit that I can use in the fall and winter.  The bottom line is that it is costing me nothing to run my well pump for hours!  The weekly energy chart for my entire property below shows that I was using a lot of energy to run my two heat pumps in the winter when I have much less sun here in Maine at the 43rd parallel.  As I get more sun and the weather warms up reducing the need for the heat pumps, eventually the solar starts producing a surplus in May.

weekly net energy consumption

My electric bills spiked up over $300 for a few months in the dead of winter mostly due to the heat pumps that I installed, but this is a lot less expensive than heating with propane as I had in the past.  But then from May through October, I will pay the utility just a connection fee of around $13 a month and I will use my accumulated credits to cover my energy use into November and December hopefully.

You can see a video about my recent installation of additional solar panels on YouTube: https://www.youtube.com/watch?v=hl8r-gZupfE

 I find myself checking energy use on the Emporia app every week or so to see what is using the most energy.  The biggest energy consumers are my (self installed) heat pumps, one in my house, and one in my workshop.  Here's a weekly chart of energy for my house heat pump:

It was working hard during the winter to keep my living/dining room area warm when temperatures remained below freezing for weeks at a time.  As you can see, energy use plummeted in May when I often shut it off completely, but now in late June I am turning it on for cooling but it uses a great deal less energy for that.





Monday, April 18, 2022

Effective tick control on a budget

 It's spring in Maine and the crocus and daffodils are starting to come up and it's time to start thinking about tics.  Last year I purchased a product called Thermacell Tick Control:  (Click here to purchase on Amazon - As an Amazon Associate I earn from qualifying purchases.)


It's basically a cardboard tube with cotton balls soaked in permethrin - the stuff that kills tics on contact and you typically spray it on your clothes.  You get six tubes for roughly $20. You tuck these tubes into nooks and crannies in the yard around your home.  The theory is that small rodents will use the cotton as nesting material and get permethrin on their bodies which will kill tics on contact and reduce the breeding population.  When I used this product last year, I saw dramatic reduction in the amount of tics I found on my body.  While I did find a few ticks on me in the early spring, there was almost nothing after that and I walk around in the tall grass on my property quite a bit.


 I realized when I was opening a vitamin bottle recently that I could use the cotton packing and just spray it with permethrin myself.  This stuff is really nasty, so I took it outside and sprayed it on to the cotton on-site and then tucked it into the bottom of my woodpile.  I wore surgical gloves when I did it because I don't want to get any of that nasty permethrin on my hands.  I have done this a few times now and every now and then I will see bits of cotton tucked into different places in the bottom of my woodpile and elsewhere, so I know that chipmunks and mice are using it.

Saturday, March 5, 2022

 I recently added one more 375 W solar panel to my south facing array.  I made a YouTube video that documents the process in detail to show how relatively simple it is for anyone with building skills to install a solar panel:

After installing a heat pump in both my house and workshop buildings I was hoping that my energy costs would be the same or at least go down a little.  It doesn't seem to be working out that way despite adding these panels, but the heating season isn't over yet.  My first electric bill was over $300, as was the second one.  But given that my propane costs for heating season run over $1000, I'm hoping that I'm going to come in a little lower than that.  

The primary reason for doing all of this is to get off of fossil fuels so I'm very happy with that.  and, what energy I don't generate with solar comes from a solar farm here in Maine, so I am essentially carbon neutral other than the modest amount of propane I use for cooking, clothes drying, and water heating.  eventually, I will tackle at least two of those issues and convert to electricity.

Now I am pretty much maxed out for solar panels, so there's not much room for improvement.


Wednesday, December 22, 2021

Home electrical energy monitoring with Emporia



 

Click here to buy




As an energy efficiency maven, I am always interested in looking for ways to monitor my energy usage.  The more I can learn about how my energy is used the more I can figure out ways to conserve.  Over the years I have experimented with different kinds of energy monitors and just recently discovered this very affordable home electrical energy monitoring system.   

An Emporia system like the one pictured above sells for around $160.  (click here to purchase one - As an Amazon Associate I earn from qualifying purchases.
This system allows you to monitor 16 separate circuits in your circuit breaker box.  A smaller 8 circuit system sells for around $100.  I have installed two of these systems, one in my workshop that also feeds through to the house and a separate system in the main breaker panel of the house.  

They also sell smart plugs that can be controlled by your home automation system.  These also connect into the monitoring system so you can monitor energy for specific plug in items:

I have ordered one of these to check out and might use it to monitor and control my AV system via my Alexa app and Echo devices.

Having recently installed heat pumps in both buildings and also added 5 375 W panels to my solar array, I wanted to see how everything was working out.   (I was a little shocked that my first electric bill since installing the heat pumps and upgrading the solar power system came out at over $250! - but my main reason for doing this was to stop using propane for heating both buildings and I think it will come out less expensive per heating season).

Installation is surprisingly easy so long as you're comfortable opening up your breaker panel and I had absolutely no trouble getting the system working within 1/2 an hour so.  below is a picture of my main breaker panel with the Emporia system installed:
circuit breaker panel with Emporia monitoring equipment

Yes, I know, it looks messy, but it is all safe and functional.  The system includes two very large 200 Amp current transformers at the top that measure all the power coming into the building from the utility:
200 amp current transformers installed

Then multiple small current transformers clip over the wires to the circuits that you want to monitor:

small current transformers installed

These are then all plugged into the monitor device that sends signals out via Wi-Fi. There is an antenna that pokes out through the wall of the breaker box that you can see in the bottom of the image:
Emporia monitoring unit installed in the breaker box

A few minutes after installing the app, I could see real-time energy data showing up in the form of graphs and lists of circuits that I had named.  I particularly like that you can configure it to record power from your solar power system.

Below is a screenshot from my phone showing my EV charging station feeding some power to my Chevy volt to keep the battery warm.  The temperature is hovering around freezing in late December here in Maine and my car draws power in small bursts to keep it warm in the winter when it's not actually charging.  While I knew this was something that was going on, it is educational and informative to see exactly how much power and how often it is used to keep the car battery warm.  Keeping the battery warm dramatically extends its useful life.

 
This screenshot shows a weeks worth of data for my house.  Clearly, the heat pump is the biggest energy user followed by a small 1.2 kW electric heater used in my small bedroom at night (the master bedroom is heated by propane).  Solar power in this breaker panel comes from one 240 W solar panel mounted on the side of the house.
list of circuits and the energy they are using

 This screenshot shows daily solar energy produced by my entire solar array of  36 solar panels:

screenshot showing my solar energy system daily generation

And this screen shows the hourly solar output for the last couple of days:
screenshots showing hourly energy produced by my solar system

Yes, the solar days are quite short in December here in Maine!

It is said that knowledge is power, so I am feeling quite empowered by all of this useful information!   I find myself opening the app on my phone several times a day and poking around through all the information to see what I can learn.  It is particularly interesting to watch the real-time chart updating every second to see the energy cycles of things like the heat pump, well pump, solar power system and EV charging station.


Saturday, November 20, 2021

 

Removing old solar thermal collectors

5 new 375W solar PV panels

A few weeks ago I completed the DIY installation of a mini split heat pump system in my workshop.  The system essentially replaces the solar heating system I built that used to use four large 4' x 8' solar collectors on the south facing shed roof of my workshop.  

I had installed the solar heating system 20 years ago and it had offset the use of propane over the years.  But that system could not begin to compare with the efficiency of electric heat pumps, and it is my goal to get off of fossil fuel as much as possible. The system used a few hundred gallons of propane last year.  Over the years I had learned to optimize the use of that system which originally used over 800 gallons a year, in the last two years it has been below 300 gallons.  You can see historical records of my propane consumption on this page of my blog.  The problem with fossil fuels is that their prices are unregulated and the cost of a gallon of propane has nearly doubled over the last 20 years.  

The propane tanks will remain in place to feed my automatic standby generator which is a necessity here in rural Maine.  Eventually I hope to replace that with a battery system since I can run that generator up to 7 days cumulatively in any given year due to extended power outages from storms etc.

The new REC brand solar panels are rated at 375 W each with a total theoretical maximum capacity of around 1800 W.  So far, I am seeing a maximum output of a little over 1400 W at noon at this time of year.  I don't have enough energy data for the new heat pumps to know whether this will completely offset the energy required to operate them.  But I am hoping it will.

 

mounting rails installed

inverter installed

I purchased a complete kit from the altE store in Massachusetts.  I simply called up my account manager, Ben and asked him to spec out a system that could produce close to 2000 W and cost less than $2500.  He specified everything that I would need including every single nut and bolt and it came in at around $2000.  I drove down to Massachusetts (a three hour trip) with my friends pickup truck to get all the equipment.  This includes five brand-new IQ7A micro-inverters made by Enphase.  These are state-of-the-art seventh generation devices that convert the solar panel power to 240 V that feeds right into my building.  (My original system used the M190 model inverter which was their first product over 10 years ago and 8 of those 30 units have failed over the years but were replaced under warranty).

I am so familiar with installing systems like this that I didn't glance at any documentation because it is so simple and plug-and-play for someone with my experience. 
The sequence involves:

  • installing mounting rails
  • mounting the micro inverters to the rails and connecting them to the umbilical
  • running wire from the breaker box to the roof
  • Mounting and connecting the solar panels

What could be simpler!

last year my solar power system provided all the power for my property from June through October. you can see historical statistics of my solar power system here.  I'm hoping these added panels will get me close to net zero.  Time will tell!

Here's a video I made about this whole project: