I just got back from touring the ecoMaine waste management facility in Portland Maine. They operate as a nonprofit and support themselves with multiple revenue streams. They charge a tipping fee for both single stream recyclables and waste. This is based on tons delivered as each truck is weighed before and after drop off and those fees are passed on to the customer. Their waste to energy facility generates significantly more energy than they need to run the facility so they sell the excess electricity to power roughly 15,000 homes. The waste (ash) from this facility is stored in a landfill nearby.
![]() |
| waste drop-off at ecomaine |
My small town with a population of roughly 3500 people is about 40 minutes drive from the facility so we need to contract a company that hauls the waste and recyclables down to the plant. This means that our town pays for two services, the hauling company and the tipping fees. Tipping fees for trash and recycling are often similar, but these rates vary depending on the terms the community established with ecomaine. We have curbside garbage pickup every week and recycling is picked up every two weeks.
![]() |
| recycling bins in my laundry room |
The clear bin in the foreground is for redeemable cans and bottles. Here in Maine we pay a $0.05 redemption fee on every bottle and some larger things like vodka bottles are $0.15. I subscribe to a redemption system known as Clynk that operates in a number of states. You fill their green plastic bag and stick a barcode on it and just take it to a redemption center and drop it off. Your account is credited and you can redeem the funds at the adjacent supermarket.
![]() |
| recyclables tipping hall |
Trucks deliver recyclables to a large bunker area where a skip loader piles that towards the back and then it is lifted into the drum feeder that feeds into the whole plant. Click here to see the whole process flow of their plant.
The first step separates out the cardboard. At $72/ton this is a fairly good value product but just one of many revenue streams.
![]() |
| bales of cardboard |
After the cardboard is separated out a large conveyor brings remaining materials into the manual pre-sorting room.
| ||
| manual pre-sorting |
Here workers separate out trash and plastic bags and anything else that can't be recycled. It's surprising how people don't really understand what needs to be recycled and what cannot. Plastic bags are the bane of their existence and have to be pulled out of the stream before it goes any further or the bags will clog up the works.
From there newspaper and mixed paper are screened and separated, checked by quality control and then sent to the balers.
Then a magnetic separator pulls out steel cans and other ferrous metal items. Ferrous metals are at $202/ton which is a fairly strong market value.
From there glass is separated, crushed and cleaned to eliminate trash. While glass is one of the most recyclable materials in the world, this particular plant does not have a good market for it. So the crushed glass is stored in a pile at ecomaine's landfill until they can find people who can use it. Because crushed glass is so heavy it's not practical to ship it long distances due to the expense.
(I remember living in Baltimore in the 1970s when they did an experiment to use crushed glass in asphalt. It is known as glassphalt and driving on it at night you can see all the glass glimmering like twinkling stars in the road! I think this is a more common practice these days but back then it was a very new concept.)
![]() |
| plastics bins |
![]() |
| mixed color plastic bales |
![]() |
| aluminum and cardboard bales |
This facility is about 20 years old and they are currently building a new 55,000 sq.ft.replacement for it nearby since their sorting technology is aging out. Here are the stats for the recycled materials for 2026.
The new plant will be able to sort 1000 items per minute, or 25 tons per hour. It optically sorts using sensors, near-infrared spectroscopy, and AI to identify and
separate materials at high speed.
Our tour guide said that this is among the only remaining plants using this "vintage" technology and the new plant should come on stream in early 2027. They plan to continue using both plants until the new one is fully up to speed but it will be more efficient and better structured to process recyclables.
As an engineer I'm fascinated by the controls and all the vintage green LEDs on their layout map. This looks more like 1970s technology to me than early 2000's!
About 20 years ago I toured another recycling processing plant in New Hampshire and one of the biggest takeaways I got from that tour was that the whole plant was run by one guy with a touchscreen out in the middle of the facility. That one person was able to adjust the speeds of all of the different conveyor belts to optimize for different materials as they came in. He was able to establish presets if he saw a lot more cardboard coming in - he could change the whole system to optimize for that. Perhaps the new plant in Portland will use a similar technology?
Another fun take away from that earlier tour was what they did with the glass. It turns out that the aggregate color of all the crushed glass including clear, green, blue, and brown came out as a light brown. This glass was sold to a Coors bottling plant a mile or so away and it was perfect for their brown beer bottles.
if you recycle - and I certainly hope that you do, it's important to be attentive to what can or should be recycled so you don't damage the sorting equipment.















No comments :
Post a Comment
I welcome all thoughtful comments and feedback!